Service providers face ever-increasing demand for capacity in a limited amount of spectrum. Cambium Networks ePMP™ Force 4625 Subscriber Modules (SM) meets this demand offering high performance and low latency across both point-to-multipoint (PMP) and point-to-point (PTP) deployments.
The Force 4625 SM is offered with a 25 dBi integrated dish antenna.
- High capacity and latencies less than 5 ms when using ePTP technology.
Proven air interface on top of 802.11ax technology
- Interoperability with the ePMP 4600 Series AP which uses MU-MIMO to achieve more than 4 Gbps per sector by transmitting to two ePMP 4600 Series SMs simultaneously.
- Security features meeting the requirements of enterprise, industrial, government and service provider users.
Management by Cambium Networks cnMaestro™ management system for easy provisioning, monitoring and upgrades.
- Network planning with LINKPlanner and cnHeat.
- Each SM comes with a Power over Ethernet injector and pole mount hardware included.
Specification
| SPECTRUM |
|---|
| Channel Width MHz |
20 | 40 | 80 | 160 |
| Proprietary Physical Layer |
ePMP air interface with 2x2 MIMO/OFDMA based on 802.11ax underlying technology |
| Channel Spacing |
Configurable in 5 MHz increments |
| Frequency Range |
Wide Band Operation 5925–7125 MHz (Note: Allowable frequencies and bands are dictated by individual country regulations.) Operation under AFC (Automatic frequency coordination) control in FCC jurisdictions. |
| PERFORMANCE |
|---|
| ARQ |
Yes |
| Maximum Capacity |
1 Gbps |
| Latency |
< 5 ms |
| Transmit Power Range |
+3 to +30 dBm (combined, to regional EIRP limit) (1 dB interval) |
| PHYSICAL |
|---|
| Ethernet Interface |
100/1000 BaseT, rate auto negotiated, 802.3at compliant |
| Surge Supression* |
1 Joule Integrated |
| Environmental |
IP55 |
| Power Consumption |
13 W |
Pay
